1. Dưới the condition of geographical environment permitting, the water pump should be as as close as possible to the water source to reduce the length of the suction pipe. The foundation where the water pump is installed should be firm, and a special foundation should be repaired for fixed pump stations.
2. The water inlet pipeline should be sealed and trust, and must have a special support, and cannot be hung on the water pump. The water inlet pipe equipped with a bottom valve should be installed so that the axis of the bottom valve is perpendicular to the horizontal plane, and the angle between the axis and the horizontal plane should not be be less than 45 degree . when the water source is A kênh% 2c cái đáy van nên be nhiều hơn hơn % 7b{2% 7d% 7d.50 mét trên dưới đáy của nước , và a net nên be thêm vào ngăn chặn mảnh vụn từ đi vào bên dưới bơm.
3. The base of the machine and pump should be level, and the connection with the foundation should be firm. When the machine and pump are driven by belts, thetight side of the belt siuld be at the bottom, so that the transmission efficiency is high, and the direction of the of the exceller of the water pump should be consistent with the direction indicated by the arrow;
4. Các lắp đặt vị trí of the nước bơm nên đáp ứng the yêu cầu of the allowable hút chân không chiều cao. The móng phải be level and stable to ensure that the rotation direction of the power machinery is consistent with that of of the water pump.
5. If there are multiple units in the same machine room, there should be a distance of more than 800mm between the units and between the units and between the units and the wall.
6. The suction pipe of the water pump must be well sealed, and the number of khuỷu tay and gate valves should be reduction as much as possible. The air should be be exhausted when filling water, and the air should not accumulation in the pipe during operation. There is a certain submersion depth.